Net Capacity: 50 tons concentrated in 16 feet
Nominal: OAL 53 feet Closed to 58 feet Open 8 feet 6 inches Wide
- Extendable 53-58' model
- 24" Flip Neck
- AirWeigh Load Digital Scale
- OEM 235/75R 17.5, 16PR tires
GOOSENECK: hydraulic detachable Gooseneck, 50" loaded 5th wheel height, 15" Setting, 2" King pin narrow neck, chain storage rack under gooseneck
2" king Pin 84" swing radius, PTO powered: two main & one lift arm cylinders
hydraulic controls in a separate covered box, front lugs provisioned for flip neck, hydraulic connection on both sides of neck for winching operation.
2" king Pin 84" swing radius, PTO powered: two main & one lift arm cylinders
hydraulic controls in a separate covered box, front lugs provisioned for flip neck, hydraulic connection on both sides of neck for winching operation.
DECK: nominal deck length: 22.5 feet closed to 27.5 feet, open loaded deck height: 22 in, 6 in loaded ground clearance, 4 Beam design - 100,000 psi yield flanges & 80,000 web minimum, all 4 Beams same height & Beams are tapered like Paver Models I-Beam Cross members on (approx.) 24" centers, Junior I-Beam Cross members alternating - outside bay only, 1.5" Nominal Apitong Decking - full width, secured by floor screws, D Rings: 14 Pairs(6 Deck, 1 Bolster, 1 Rear CM, 3 Porch, 1 Trans.), tie downs & chain slots : top flange outer beams 24” centers, outriggers: 10 Pair swing out + 1 pair heavy duty hook on at front Front flip ramps (removable) for loading, two 6 ft AL. bus ramps (Front/Rear Lugs included), stored on neck.
REAR SECTION: k 19 ft 7 in, open boom trough, brackets for oversize load sign, axles: three 5" round, 5/8" wall 25000# nominal capacity, Suspension: ridewell or equivalent air ride with oil seals, 60" axle spacing, Open wheel wells, axle chains with cut off valves, rear axle equipped with air lift, auto slack adjusters, 12-1/4" x 7-1/2" air, parking brakes 1st & 2nd axles, ABS: 2S1M, Hub: 8 Stud, Hub Piloted, long studs, cast drums, 235/75R17.5, 16PR (Low Profile) radial tires, aluminum outer & steel inner wheels, tire inflation system, tire inflation system.
GENERAL: 12V System with 7 way, Modular Harness, LED Sealed Beam Lights Strobe light package with toggle switch on rear, epoxy primer & black polyurethane paint, flag and flag holders - 2 pairs - front deck and rear of trailer, mid-turn signal/clearance light, tool tray: 4' expanded metal at front of deck (approx.) red & white conspicuity tape and KS mud flaps, winch: two 20,000 lb. planetary hydraulic on neck & rear deck 100’ of 5/8” wire rope & shackle, fairing rollers & cable tensioner, Four function wireless remote (controls both winches) LED-Work lights on both winches with covered toggle switch battery back-up w/ charger on rear for disconnected neck operation.